1 Oz Super Gold Cyanoacrylate No Odor!

SUPER-GOLD and SUPER-GOLD+

• Are our odorless INSTA-CURE CA
• They are non-frosting and take only 2 or 3 seconds longer to bond.
  
• There are no fumes that irritate the nose and eyes. The SUPER-GOLD's do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARFs. They will not fog clear plastic.
  
• SUPER-GOLD+ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE is still recommended for assembling the rest of plastic kits.
  

Wood can be bonded to white foam with SUPER-GOLD + in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET to one piece and apply SUPER-GOLD+ to the other before joining. Excess INSTA-SET may create too much heat, which can melt the foam. Both SUPER-GOLD's cure to a more flexible consistency for better shock absorption. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.

Tip: Cyanocrylate is a durable and very tough finish for wood handles. The problem has always been the smell when Cyanocrylate cures. This is the answer. No odor. Use a vinyl glove or even a sandwich bag to spread a thin layer of CA on. Let it cure or shoot it with Insta-Set, give it a light sanding with with a small grit sandpaper and keep applying coats until it is as thick as you want it. Then sand it down to 600 grit and buff to a deep shine.