Shields, Corbys, Screws Handles : US Knife Makers!, Operated by a knifemaker for knifemakers!

Shields, Corbys, Screws Handles

Shields and Inlays for knife handles.
Corby Bolts
Screws and connectors

Also see the Handle Material selection (to the left on the menu bar) for handle material like spacer, wood burl, micarta and more...

Product Image

Item Name-

Price

# shield holder jig plate fixture

Fixture Jig for Shield Templates This tool is the fixture to clamp your handle material and shield template together for machining the pocket to...

$100.70

Add:

## 3/32" Round Engraver compare to Dremel 107, 3/32" shaft

3/32" Round Engraver Compare to a Dremel 107 tool Use these for inlay carving - or just carving in general. Very small and delicate. Use these...

$2.39

Add:

## 3/64" Need Engraver compare to Dremel 112, 3/32" shaft

3/64" Needle Engraver Compare to a Dremel 112 tool Use these for inlay carving. Very small and delicate. Use these in combination with the...

$2.39

Add:

## 5/64" Cylinder Engraver compare to Dremel 193" 1/8" shaft

5/64" Round Cutting Burr Compare to a Dremel 193 tool Use these for inlay carving - or just carving in general. Very small and delicate. Use...

$4.45

Add:

##1/16" Cross Cut Needle Engrv compare Dremel 113, 3/32" shaft

1/16" Cross Cut Needle Engraver Compare to a Dremel 113 tool Use these for inlay carving - or just carving in general. Very small and delicate....

$2.65

Add:

##1/8" Straight Router bit compare to Dremel 650, 1/8" shaft

1/8" Straight Router Bit Compare to a Dremel 650 tool Use these for inlay carving - or just carving in general. Very small and delicate. Use...

$4.48

Add:

#1 Shield Spartan Knife Handle Shield 410SS .048" thick

Shield for Knife Handle These are waterjet cut from 410 stainless steel and are .048" thick. You will see a slight tab burr on on side where...

$1.06

Add:

#1 Template Spartan made from 1095 1/8" thick

Template for Shields for Knife Handles These are waterjet made from 1095 1/8" thick. Size is 3"x1". These templates are used to mill...

$21.20

Add:

#10 Shield Double Take Knife Handle Shield 410SS .048" thick

Shield for Knife Handle 1.05" long x .22" wide These are waterjet cut from 410 stainless steel and are .048" thick. You will see a...

$1.06

Add:

#10 Template Shield Double Take made from 1095 1/8" thic

Template for Shields for Knife Handles These are waterjet cut, made from 1095 and are 1/8" thick. Size is 3"x1". These templates are...

$21.20

Add:

#11 Shield Large Oval Knife Handle Shield 410SS .048" thick

Shield for Knife Handle These are waterjet cut from 410 stainless steel and are .048" thick. You will see a slight tab burr on on side where...

$1.06

Add:

#11 Template Shield Large Oval made from 1095 1/8" thick

Template for Shields for Knife Handles These are waterjet cut. Made from 1095. Size is 3"x1"x1/8". These templates are used to mill...

$21.20

Add:

#12 Shield Arrow Knife Handle Shield 410SS .048" thick

Shield for Knife Handle These are waterjet cut from 410 stainless steel and are .048" thick. You will see a slight tab burr on on side where the...

$1.06

Add:

#12 Template Shield Arrow made from 1095 1/8" thick

Template for Shields for Knife HandlesThese are waterjet cut made from 1095 & 1/8" thick Size is 3"x1". These templates are used...

$21.20

Add:

#14 Shield Double Designer Knife Handle Shield 410SS .048" thic

Shield for Knife Handle These are waterjet cut from 410 stainless steel and are .048" thick. You will see a slight tab burr on on side where...

$1.06

Add:

#14 Template Shield Double Designer made from 1095 1/8" thick

Template for Shields for Knife Handles These templates are waterjet cut and made from 1095 1/8" thick. Size is 3"x1". These...

$21.20

Add:

#15 Shield Lil' Guy Knife Handle Shield 410SS .048" thick

Shield for Knife Handle These are waterjet cut from 410 stainless steel and are .048" thick. You will see a slight tab burr on on side where...

$1.06

Add:

#15 Template Lil' Guy made from 1095 1/8" thick

Template for Shields for Knife Handles These templates are waterjet cut and made from 1095 1/8" thick. Size is 3"x1". These templates...

$21.20

Add:

#16 Shield The .45 Knife Handle Shield 410SS .048" thick

Shield for Knife Handle These are waterjet cut from 410 stainless steel and are .048" thick. You will see a slight tab burr on on side where...

$1.06

Add:

#16 Template Shield The .45 made from 1095 1/8" thick

Template for Shields for Knife Handles These templates are waterjet cut and made from 1095 1/8" thick. Size is 3"x1". These...

$21.20

Add:

#17 Shield Arrow Head Knife Handle Shield 410SS .048" thick

Shield for Knife Handle These are waterjet cut from 410 stainless steel and are .048" thick. You will see a slight tab burr on on side where...

$1.06

Add:

#17 Template Arrow Head made from 1095 1/8" thick

Template for Shields for Knife Handles These templates are waterjet cut and made from 1095 1/8" thick. Size is 3"x1". These templates...

$21.20

Add:

#18 Shield Large Bowtie Knife Handle Shield 410SS .048" thick

Shield for Knife Handle These are waterjet cut from 410 stainless steel and are .048" thick. You will see a slight tab burr on on side where...

$1.06

Add:

#18 Template Large Bowtie made from 1095 1/8" thick

Template for Shields for Knife Handles These templates are waterjet cut and made from 1095 1/8" thick. Size is 3"x1". These...

$21.20

Add:

#19 Shield Single Design Knife Handle Shield 410SS .048" thick

Shield for Knife Handle These are waterjet cut from 410 stainless steel and are .048" thick. You will see a slight tab burr on on side where...

$1.06

Add:

#19 Template Shield Single Designer made from 1095 1/8" thick

Template for Shields for Knife Handles These templates are waterjet cut and made from 1095 1/8" thick. Size is 3"x1". These...

$21.20

Add:

#2 Shield Diamond Knife Handle Shield 410SS .048" thick

Shield for Knife Handle These are waterjet cut from 410 stainless steel and are .048" thick. You will see a slight tab burr on on side where the...

$1.06

Add:

#2 Template Shield Diamond made from 1095 1/8" thick

Template for Shields for Knife Handles These are waterjet cut made from 1095 and are 1/8" thick. Size is 3"x1". These templates are...

$21.20

Add:

#20 Shield Big 'un Knife Handle Shield 410SS .048" thick

Shield for Knife Handle Approximately 1.03" x .45" These are waterjet cut from 410 stainless steel and are .048" thick. You will...

$1.06

Add:

#20 Template Shield Big un made from 1095 1/8" thick

Template for Shields for Knife Handles These templates are waterjet cut and made from 1095 1/8" thick. Size is 3"x1". These templates...

$21.20

Add:

#21 Shield Da Bomb Knife Handle Shield 410SS .048" thick

Shield for Knife Handle These are waterjet cut from 410 stainless steel and are .048" thick. You will see a slight tab burr on on side where...

$1.06

Add:

#21 Template Da Bomb made from 1095 1/8" thick

Template for Shields for Knife Handles These templates are waterjet cut and made from 1095 1/8" thick. Size is 3"x1". These templates...

$21.20

Add:

#22 Shield Propeller Knife Handle Shield 410SS .048" thick

Shield for Knife Handle Measures: .93" x .23" These are waterjet cut from 410 stainless steel and are .048" thick. You will see a...

$1.06

Add:

#22 Template Shield Propeller made from 1095 1/8" thick

Template for Shields for Knife Handles These templates are waterjet cut and made from 1095 1/8" thick. Size is 3"x1". These...

$21.20

Add:

#23 Shield Biker Knife Handle Shield 410SS .048" thick

Shield for Knife Handle These are waterjet cut from 410 stainless steel and are .048" thick. You will see a slight tab burr on on side where...

$1.06

Add:

#23 Template Biker made from 1095 1/8" thick

Template for Shields for Knife Handles These are waterjet made from 1095 1/8" thick. Size is 3"x1". These templates are used to mill...

$21.20

Add:

#24 Shield DOGHEAD Knife Handle Shield 410SS .048" thick

Shield for Knife Handle These are waterjet cut from 410 stainless steel and are .048" thick. You will see a slight tab burr on on side where...

$1.06

Add:

#24 Template Doghead made from 1095 1/8" thick

Template for Shields for Knife Handles These are waterjet made from 1095 1/8" thick. Size is 3"x1". These templates are used to mill...

$21.20

Add:

#25 Shield Arkansas Knife Handle Shield 410SS .048" thick

Shield for Knife Handle These are waterjet cut from 410 stainless steel and are .048" thick. You will see a slight tab burr on on side where...

$1.06

Add:

#25 Template Arknasas made from 1095 1/8" thick

Template for Shields for Knife Handles These are waterjet made from 1095 1/8" thick. Size is 3"x1". These templates are used to mill...

$21.20

Add:

#26 Shield Oklahoma Knife Handle Shield 410SS .048" thick

Shield for Knife Handle These are waterjet cut from 410 stainless steel and are .048" thick. You will see a slight tab burr on on side where...

$1.06

Add:

#26 Template Oklahoma made from 1095 1/8" thick

Template for Shields for Knife Handles These are waterjet made from 1095 1/8" thick. Size is 3"x1". These templates are used to mill...

$21.20

Add:

#27 Shield Bollacks Knife Handle Shield 410SS .048" thick

Shield for Knife Handle .70" long x .25" wide These are waterjet cut from 410 stainless steel and are .048" thick. You will see a...

$1.06

Add:

#27 Template Bollacks made from 1095 1/8" thick

Template for Shields for Knife Handles These are waterjet made from 1095 1/8" thick. Size is 3"x1". These templates are used to mill...

$21.20

Add:

#28 Shield Federal Knife Handle Shield 410SS .048" thick

Shield for Knife Handle .38"x.63" These are waterjet cut from 410 stainless steel and are .048" thick. You will see a slight tab...

$1.06

Add:

#28 Template Federal made from 1095 1/8" thick

Template for Shields for Knife Handles These are waterjet made from 1095 1/8" thick. Size is 3"x1". These templates are used to mill...

$21.20

Add:

#29 Shield Wing Knife Handle Shield 410SS .048" thick

Shield for Knife Handle These are waterjet cut from 410 stainless steel and are .048" thick. You will see a slight tab burr on on side where...

$1.06

Add:

#29 Template Wing made from 1095 1/8" thick

Template for Shields for Knife Handles These are waterjet made from 1095 1/8" thick. Size is 3"x1". These templates are used to mill...

$21.20

Add:

#3 Shield The UP Knife Handle Shield 410SS .040" thick

Shield for Knife Handle .34" long x .31" wide These are waterjet cut from 410 stainless steel and are .040" thick. You will see a...

$1.06

Add:

#3 Template Shield The UP made from 1095 1/8" thick

Template for Shields for Knife Handles These are waterjet cut made from 1095 and are 1/8" thick. Size is 3"x1". These templates are...

$21.20

Add:

#30 Shield Sowbelly Knife Handle Shield 410SS .040" thick

Shield for Knife Handle .60" long x .35" wide These are waterjet cut from 410 stainless steel and are .040" thick. You will see a...

$1.06

Add:

#30 Template Sowbelly made from 1095 1/8" thick

Template for Shields for Knife Handles These are waterjet made from 1095 1/8" thick. Size is 3"x1". These templates are used to mill...

$21.20

Add:

#31 Shield The Federawlee Knife Handle Shield 410SS .040" thick

Shield for Knife Handle .55" long x .25" wide These are waterjet cut from 410 stainless steel and are .040" thick. You will see a...

$1.06

Add:

#31 Template Shield The Federawlee made from 1095 1/8" thick

Template for Shields for Knife Handles Shield is .55" long x .27" wide These are waterjet cut made from 1095 & 1/8" thick Size is...

$21.20

Add:

#33 Shield Texas outline Knife Handle Shield 410SS .048" thick

Shield for Knife Handle Approximately .43"x.37" These are waterjet cut from 410 stainless steel and are .048" thick. You will see a...

$1.06

Add:

#33 Template Texas made from 1095 1/8" thick

Template for Shields for Knife Handles Templates are 3"x1" These are waterjet made from 1095 1/8" thick. Size is 3"x1"....

$21.20

Add:

#4 Shield Roman Knife Handle Shield 410SS .048" thick

Shield for Knife Handle These are waterjet cut from 410 stainless steel and are .048" thick. You will see a slight tab burr on on side where...

$1.06

Add:

#4 Template Roman made from 1095 1/8" thick

Template for Shields for Knife Handles These are waterjet cut made from 1095 & 1/8" thick. Size is 3"x1". These templates are...

$21.20

Add:

#5 Shield Acorn Knife Handle Shield 410SS .048" thick

Shield for Knife Handle These are waterjet cut from 410 stainless steel and are .048" thick. You will see a slight tab burr on on side where...

$1.06

Add:

#5 Template Acorn made from 1095 1/8" thick

Template for Shields for Knife HandlesThese are waterjet cut made from 1095 & 1/8" thick. Size is 3"x1". These templates are used...

$21.20

Add:

#6 Shield Little Bowtie Knife Handle Shield 410SS .048" thick

Shield for Knife Handle just under 3/4" long These are waterjet cut from 410 stainless steel and are .048" thick. You will see a slight...

$1.06

Add:

#6 Template Shield Little Bowtie made from 1095 1/8" thick

Template for Shields for Knife HandlesThese are waterjet cut made from 1095 & 1/8" thick. Size is 3"x1". These templates are used...

$21.20

Add:

#60 Shield The MINI Federawlee Knife Handle Shield 410SS .040"

Shield for Knife Handle .43" long x .22" wide This is the MINI version of #31 These are waterjet cut from 410 stainless steel and are...

$1.06

Add:

#60 Template Shield The MINI Federawlee made from 1095 1/8" t

Template for Shields for Knife Handles .43" long x .22" wide This is the MINI version of #31 These are waterjet cut made from 1095 &...

$21.20

Add:

#60 Template Shield The MINI UP made from 1095 1/8" thick

Template for Shields for Knife Handles .26" long x .23" wide This is the MINI version of #3 These are waterjet cut made from 1095 and...

$21.20

Add:

#61 Shield The MINI UP Knife Handle Shield 410SS .040" thick

Shield for Knife Handle .26" long x .23" wide This is the MINI version of #3 These are waterjet cut from 410 stainless steel and are...

$1.06

Add:

#7 Shield Small Oval Knife Handle Shield 410SS .048" thick

Shield for Knife Handle These are waterjet cut from 410 stainless steel and are .048" thick. You will see a slight tab burr on on side where the...

$1.06

Add:

#7 Template Small Oval made from 1095 1/8" thick

Template for Shields for Knife HandlesThese are waterjet cut made from 1095 & 1/8" thick. Size is 3"x1". These templates are used...

$21.20

Add:

#8 Shield Sword Knife Handle Shield 410SS .048" thick

Shield for Knife Handle These are waterjet cut from 410 stainless steel and are .048" thick. You will see a slight tab burr on on side where the...

$1.06

Add:

#8 Template Shield Sword made from 1095 1/8" thick

Template for Shields for Knife Handles These are waterjet cut made from 1095 & 1/8" thick. Size is 3"x1". These templates are used...

$21.20

Add:

#9 Shield Bullet Knife Handle Shield 410SS .048" thick

Shield for Knife Handle These are waterjet cut from 410 stainless steel and are .048" thick. You will see a slight tab burr on on side where the...

$1.06

Add:

#9 Template Bullet made from 1095 1/8" thick

Template for Shields for Knife Handles These are waterjet cut made from 1095 & 1/8" thick. Size is 3"x1". These templates are used...

$21.20

Add:

Connector 1/4" round, 1/4" long, 8-32 thread Stainless

Handle connector This is the middle female connector only. 8-32 thread screws are sold separately. This is one part of a 3 part connector system....

$1.33

Add:

Connector 3/16" round, 3/16" long,4-40 thread Stainless

Handle connector This is the middle female connector only. 4-40 thread screws are sold separately to allow choice of color screw and head style. Most...

$1.33

Add:

Connector 5/16" round x .5/16" long, 8-32 thread Stainless

Handle connector This is the middle female connector only. 8-32 thread screws are sold separately. This is one part of a 3 part connector system....

$1.33

Add:

Corby BRASS LARGE .25" shaft .312" shoulder 303SS

Corby Style Bolts BRASS .25" Shaft .345" long shaft .312" (5/16") Shoulder .375" long shoulders .315" long thread...

$2.65

Add:

Corby BRASS MEDIUM .183" shaft .250" shoulder BRASS BRITE

Corby Style Bolts ..183" Shaft .330" long shaft .250" Shoulder .285" long shoulders .296" long thread Over all length is...

$2.60

Add:

Corby Style bolt LARGE .25" shaft .312" shoulder 303SS

Corby Style Bolts .25" Shaft .345" long shaft .312" (5/16") Shoulder .375" long shoulders .315" long thread Over all...

$2.28

Add:

Corby Style bolt MEDIUM .183" shaft .250" shoulder 303SS

Corby Style Bolts ..183" Shaft .330" long shaft .250" Shoulder .285" long shoulders .296" long thread Over all length is...

$2.28

Add:

Corby Style bolt MICRO .090" shaft .120" shoulder . 303SS

Corby Style Bolts .090" Shaft .180" long shaft .120" Shoulder .150" long shoulders .170" long thread Over all length is...

$2.28

Add:

Corby Style bolt SMALL.135" shaft .185" shoulder . 303SS

Corby Style Bolts .135" Shaft .235" long shaft .185" Shoulder .230" long shoulders .240" long thread Over all length is...

$2.28

Add:

Loveless style bolt .157" thread shaft .312" shoulder 303SS

Loveless style Bolts .157" Thread Shaft .990" long shaft .312" Shoulder .290" long shoulders Over all length is 1.20" 303...

$2.15

Add:

Magnum Shield Bow Tie Knife Handle Shield 410SS .04" #53

Magnum Size Shield for Knife Handle Larger size for fixed blade handles 1.5" Long x .35" wide Templates and shields are sold separately....

$1.33

Add:

Magnum Shield Diamond Knife Handle Shield 410SS .04" #50

Magnum Size Shield for Knife Handle Larger size for fixed blade handles 1.4" Long x .36" wide Templates and shields are sold separately....

$1.33

Add:

Magnum Shield Fat oval Knife Handle Shield 410SS .04" #54

Magnum Size Shield for Knife Handle Larger size for fixed blade handles 1.5" Long x .37" wide Templates and shields are sold separately....

$1.33

Add:

Magnum Shield Narrow oval Knife Handle Shield 410SS .04" #52

Magnum Size Shield for Knife Handle Larger size for fixed blade handles 1.5" Long x .25" wide Templates and shields are sold separately....

$1.33

Add:

Magnum Shield Rectangle Knife Handle Shield 410SS .04" #51

Magnum Size Shield for Knife Handle Larger size for fixed blade handles 1.5" Long x .375" wide Templates and shields are sold...

$1.33

Add:

Magnum Template Bow Tie Knife Handle 410SS .04" #53

Magnum Size Template for Knife Handle Larger size for fixed blade handles 1.5" Long x .35" wide opening Templates and shields are sold...

$21.20

Add:

Magnum Template Diamond Knife Handle 410SS .04" #50

Magnum Size Template for Knife Handle Larger size for fixed blade handles 1.4" Long x .36" wide opening Templates and shields are sold...

$21.20

Add:

Magnum Template Fat oval Knife Handle 410SS .04" #54

Magnum Size Template for Knife Handle Larger size for fixed blade handles 1.5" Long x .37" wide opening Templates and shields are sold...

$21.20

Add:

Magnum Template Narrow oval Knife Handle 410SS .04" #52

Magnum Size Template for Knife Handle Larger size for fixed blade handles 1.5" Long x .25" wide opening Templates and shields are sold...

$21.20

Add:

Magnum Template Rectangle Knife Handle 410SS .04" #51

Magnum Size Template for Knife Handle Larger size for fixed blade handles 1.5" Long x .375" wide opening Templates and shields are sold...

$21.20

Add:

Screw 4-40 Button Head 1/4" long Black 25pack Torx

25pack Screws Button Head 4-40 Thread 1/4" long shaft .292" OAL Black Oxide Torx drive T-8 NOTE: Similar to picture

$6.10

Add:

Screw 4-40 x 1/2" Button Head Stainless Steel 25ct

Button Head Torx drive Screws 4-40 25 count package 18-8SS plain finish T8 Torx drive 1/2" thread length .552" OAL

$6.63

Add:

Screw 6-32 Button Head 1/4" long Black 25pack Torx

25pack Screws Button Head 6-32 Thread 1/4" long shaft .300" OAL Black Oxide Torx drive T-10 NOTE: Similar to picture

$6.63

Add:

Screw 6-32 Button Head 1/4" long Stainless 25pack Torx

25pack Screws Button Head 6-32 Thread 1/4" long shaft .303" OAL Stainless #T-15 Torx drive NOTE: similar to picture

$5.83

Add:

Screw 6-32 Button Head 3/8" long Black 25pack Torx

25pack Screws Button Head 6-32 Thread .400" long shaft 1/2" OAL Black Oxide Torx drive T-10

$6.10

Add:

Screw 6-32 Button Head 7/16" long Black 25pack Torx

25pack Screws Button Head 6-32 Thread 7/16" long shaft Black Oxide Torx drive

$6.63

Add:

Screw 6-32 x 3/8" OAL Flat Head 100ct

6-32 x 3/8" OAL Length 18-8 SS Screws 100count These use a T-15 TORX drive. OAL 3/8" Thread length is 1/4" 82degree countersink 18-8...

$14.05

Add:

Screw 6-32 x 3/8" OAL Flat Head 25ct

6-32 x 3/8" OAL Length 18-8 SS Screws 25count These use a T-15 TORX drive. OAL 3/8" Thread length is 1/4" 82degree countersink 18-8...

$5.30

Add:

Screw 8-32 Button Head 1/4" long Stainless 25pack Torx

25pack Screws Button Head 8-32 Thread 1/4" long shaft Stainless #T-15 Torx drive

$6.63

Add:

Screw 8-32 Button Head 3/8" long Black 25pack Torx

25pack Screws Button Head 8-32 Thread 3/8" long shaft .437" Over all length Black Oxide Torx drive T-15 NOTE: Similar to picture

$6.63

Add:

Screw 8-32 Flat Head 3/8" long Black Stainless 25pack Torx

25pack Screws Flat Head 8-32 Thread 3/8" long shaft Black Oxide Stainless and waxed #T-15 Torx drive

$5.30

Add:

Screw 8-32 Flat Head 3/8" long Stainless 25pack Torx

25pack Screws Flat Head 8-32 Thread 3/8" long shaft Stainless #T-15 Torx drive

$6.63

Add:

screw 8-32 Flat Head black Oxide 1/4" OAL 25pack socket drive

8-32 Thread Black Oxide Alloy steel Flat Head Socket drive Screws 1/4" OAL Thread length is just under 1/8" (3/32"). Use these for...

$5.62

Add:

Categories

Search

Information

Important Links

Bestsellers

SSL Certificate

Paypal Verified Seller

Shields, Corbys, Screws Handles

New Products For September - Shields, Corbys, Screws Handles