Small Wheel Attachment fixture - Holds small wheels

Small Wheel attachment fixture

• Shipping weight: 2.9lbs
• This machined aluminum fixture simply bolts onto a tool bar.
•  It holds very small wheels from 1/2" to 2".
  
• This is the ideal add on for your grinder to grind out those small finger relief notches or other small contours.

Wheels sold separately. I use a 1/2" for very small notches, a 3/4" or 1" for finger relief notches and then a 2" for hollow grinding folder blades. This is a very handy accessory for your No Weld Grinder!

For the No Weld Grinder, simply drill holes in a 1.5" x 15" tool bar to match the holes in the fixture and bolt it on! So easy a caveman could do it.

Remember these wheels are small and don't have a lot of mass to absorb and the natural heat build up from use. Excess heat causes the grease to fail in the sealed bearings and they self destruct. Try to keep the speed down so you don't burn out your bearings on your small wheels.

NOTE: Wheels not included with the fixture. They are for illustration only.

www.midwestknifemakers.com no weld grinder sander plans kits parts contact wheels